APU-Telescopic window reveal bead with mesh IDEAL-plus, white W30-plus

Die APU-Telescopic window reveal bead with mesh IDEAL-plus, white W30-plus

The APU telescopic window reveal bead with mesh IDEAL-plus is used in compound heat insulation systems as specified in the latest APU selection criteria. In front of the reveal insulation the profile is stuck flush to the structural element there and after completion of the plastering work forms a clean and reliable termination of the plaster.

The profile comes with a self-adhesive PE foam tape, which ensures a watertight, lasting seal. A TPE protective lip protects the PE foam tape and forms a visually clean termination with the structural element. After the protective flap is pulled off, the integrated, flexible telescopic mechanism can absorb movements in any direction in the area around the joint. There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. There is a piece of self-adhesive tape on protective flap in order to secure the third-party protective film. This protects the window during the plastering work. After completion of these tasks, the protective flap is pulled off and what is created is a clean edge to the plaster.

Area of application W30 IDEAL-plus

With adhesive connection – only for surfaces suitable for being stuck to
Test of adhesion required

Window position

Within masonry

Insulating material thicknessup tp 300mm

Window sizeup tp 10m²

Flush with masonry

Insulating material thicknessup tp 300mm

Window sizeup tp 10m²

In front of masonry

Insulating material thicknessup tp 300mm

Window sizeup tp 10m²

Tested according to:

VDPM leaflet: Class A with adhesive connection
Ö-Norm B 6400-2: Class III

Design

Telescopic window reveal bead with mesh IDEAL-plus, With protective lip and 12.5 cm mesh

W30-14plus

Length1.4 m

Packaging unit25 bars = 35 m

Weight (per PU)5.3 kg

W30-24plus

Length2.4 m

Packaging unit25 bars = 60 m

Weight (per PU)8.4 kg

Features


Material	Rigid PVC manufactured under DIN-16941 TPE manufactured under DIN-16941
Protective flap	Detachable with soft TPE connection and double-sided adhesive tape
Features	Telescopic bar with flexible TPE connection
Seal	PE foam tape 8 x 3 mm
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4 x 4 mm Ultrasonic welded
Inspections	VDPM leaflet: Class A with adhesive connection Ö-Norm 6400-2: Class III

Important notes

Storage	Always store profiles laid down in a dry place.
Test of adhesion	Perform adhesion test.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.
Selection criteria	Adhere to the latest APU selection criteria.