V81
Clip-on profile VHF-TOP-TEX12 mm, for curtain-type, rear-ventilated facades

Die APU-Clip-on profile for curtain-type, rear-ventilated facades, 12 mm V81

The APU clip-on profile VHF-TOP-TEX is used for curtain-type, rear-ventilated façades on the upper edge of the support plate in the area of the parapet or under the window sill.

The profile is equipped with a punched plaster web. A fabric strip is welded to the web. Each bar has a one-sided fabric overhang of 10 cm in the longitudinal direction. The rear leg is pre-tensioned for better hold. The soft, transparent drip edge can drain off the water in a targeted manner. After completion of the plastering work, a clean plaster finish is created.

Design

APU clip-on profile VHF-TOP-TEX 12 mm, soft, transparent drip edge and mesh 12.5 cm
V81-2012
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)8.4 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
  • Soft PVC – transparent
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems
  • 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Add to watchlist Download product sheet Download processing instructions

Your watchlist is empty