W51
Expansion joint profile DUO-TEXCorner and fine plaster with 2 x 12.5 cm mesh

Die APU-Expansion joint profile DUO-TEX, for corners W51

The APU expansion joint profile DUO-TEX is used in compound heat insulation systems at building joints. For the flush formation of a clean plaster edge, the profiles for surface areas (W52) and for inner corners (W51) are made.

The profile is made up of 2 plastic profiles, to each of which a strip of mesh is welded. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. Between the profiles there is a mesh-reinforced connecting lug made of soft PVC for absorbing movements. On every bar the connecting lug has a projection of c. 5 cm, so that the profiles are worked on in the area where the pieces abut in overlapping fashion and it is ensured that water gets guided away. The profiles can be connected flush with each other using the plug connectors (Z13) provided. What is created after completion of the plastering work is a clean termination of the plaster. In order to visually cover up the expansion joints, the cover profiles (Z22-F for flat surfaces and Z22-E for corners) are used. These can be painted over using acrylic paints.

Design

Expansion joint profile DUO-TEX, Corner and surface for fine plaster with 2 x 12.5 cm mesh
W51-2000For corners
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)15.2 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Features
  • Flexible plastic lug made of soft PVC
  • 80 mm wide
  • White
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 2 x 12.5 cm wide – MW 4 x 4 mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)
Optional accessories
  • Z22-F-2100 Expansion joint cover profile, surface
  • Z22-E-2100 Expansion joint cover profile, corner

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.
RecommendationWe recommend sticking the expansion joint cover profile Z22 on one side using appropri- ate PU adhesive/sealant.

Details

Sectional drawing in mm

 
 

 

Your watchlist is empty