Clip-on profile UNOWith straight drip edge and 12.5 cm mesh

Die APU-Clip-on profile UNO W62-1

The APU clip-on profile UNO is used horizontally in compound heat insulation systems e.g., for plaster joints up against shutter boxes or in the base area. The straight profile contour provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the plaster limb is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The bottom U-bar is used for perfectly fitting attachment to the existing structural element. The included plug connectors (Z13) and inner and outer corners (Z18 - 1) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.


Clip-on profile UNO, With straight drip edge and 12.5 cm mesh
Length2.1 m
Packaging unit10 bars = 21 m
Weight (per PU)4.0 kg


  • Rigid PVC manufactured under DIN-16941
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
  • Z13-0000 Plug connectors (1 bag
  • Z18-1-1010i Internal corners (2 pieces
  • Z18-1-1010a External corners (4 pieces)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.


Sectional drawing in mm


Application drawing

Your watchlist is empty