Drip bead DROP-TEX-QUATTROWith edge for float-finish plaster and 2 x 12.5 cm mesh

Die APU-Drip bead DROP-TEX-QUATTRO W40-4

The APU drip bead DROP-TEX-QUATTRO is used horizontally in compound heat in- sulation systems for recessed building elements, such as window and door jambs. The diagonal profile contour for float-finish plaster provides a reliable solution in respect of downward guidance of water.

The profile has two punched plaster bars. Welded onto every bar is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. To improve plaster take-up, the surfaces of the plaster edges are grooved.


Drip bead DROP-TEX-QUATTRO, With edge for float-finish plaster and 2 x 12.5 cm mesh
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)10.2 kg


  • Rigid PVC manufactured under DIN-16941
  • Min. 160 g/m2 approved for compound heat insulation systems
  • 2 x 12.5 cm wide – MW 6 x 6 mm
  • Ultrasonic welded
  • Z13-0000 Plug connectors (1 bag)
  • Z18-4-1010i Internal corners (2 pieces)
  • Z18-4-1010a External corners (4 pieces)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.


Sectional drawing in mm


Application drawing

Your watchlist is empty