APU-Base edge profile SOKA-TEX-UNO W66-1

Die APU-Base edge profile SOKA-TEX-UNO W66-1

The APU base edge profile SOKA-TEX-UNO is used in compound heat insulation systems as the bottom termination of the wall insulation.
Depending on the insulation thickness, the base edge profile is either inserted between the perimeter insulation and the wall insulation or installed in conjunction with the Z25 base rail. Where insulating material thicknesses differ, the base edge profile can in each instance be extended by 50 mm using the extension for W66 (Z23). The base edge profile forms an exact plaster edge with a drip nose.

The base edge profile SOKA-TEX-UNO, with its straight contour, ensures that water is accurately guided away. There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10 cm in the lengthways direction. The included plug connectors (Z13), butt connectors (Z61) and inner and outer corners (Z18 - 1) enable the profiles to be joined and fitted very precisely. The profile can optionally be fixed in the insulation using plastic nails Z21.
What is created after completion of the plastering work is a clean termination of the plaster.

Design

Base edge profile SOKA-TEX-UNO, With straight drip edge and 12.5 cm mesh

W66-1-2000

Length2.0 m

Packaging unit25 bars = 50 m

Weight (per PU)10.3 kg

Features


Material	Rigid PVC manufactured under DIN 16941
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm Ultrasonic welded
Accessories	Z13-0000 Plug connectors (1 bag) Z18-1-1010i Internal corners (2 pieces) Z18-1-1010a External corners (4 pieces)
Optional accessories	For the subsequent installation of perimeter insulation and for installation without perimeter insulation: Z25-2005 Base rail Z-Foam 50 mm Z25-2010 Base rail Z-Foam 100 mm Z25-2016 Base rail Z-Foam 160 mm For installation without perimeter insulation (insulation material thickness up to 150 mm): Z20-2005 Mounting rail 50 mm Z20-2010 Mounting rail 100 mm For insulating material extension: Z23-2000 extension for W66 2.0 m For optional fixation in the insulation: Z21-2000 APU-plastic nails

Important notes

Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.
Perimeter insulation	For installation without perimeter insulation, the closed configuration must be used. For insulation thicknesses of 200 mm or more, the Z23 must also be embedded in reinforcement base plaster between the profile (on the upper side of the support flange) and the insulation. see product documents Z25