APU-Clip-on profile for plaster-base boards, 10 mm W80-10

Die APU-Clip-on profile for plaster-base boards, 10 mm W80-10

The APU clip-on profile for plaster-base boards (10 mm, 12 mm, 15 mm and 20 mm) is used horizontally in compound heat insulation systems, e.g., where plaster abuts with the cases of roller shutters or of external Venetian blinds. The cranked profile contour provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the bar is a fabric strip. Each bar has a fabric overhang on one side of c. 10cm in the lengthways direction. For the fixing to the plaster-base board there is a strip of PE foam tape on the inside on the bottom bar. For improved hold, the front and rear limbs are pre-tensioned. The included plug connectors (Z13) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Clip-on profile for plaster-base boards, With drip edge and 12.5 cm mesh

W80-201010 mm

Length2.0 m

Packaging unit25 bars = 50 m

Weight (per PU)8.6 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Fixation	PE foam tape 7 x 1 mm
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm Ultrasonic welded
Accessories	Z13-0000 Plug connectors (1 bag)

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.