APU-Base rail SOLI-TEX-ZERO W61-0

Die APU-Base rail SOLI-TEX-ZERO W61-0

The APU base rail SOLI-TEX-ZERO is used in compound heat insulation systems as the bottom termination of the wall insulation. The base rail is available in different projection lengths (50, 60, 80, 100, 120, 140 and 160 mm insulating material thickness). Where the insulating material is relatively thick, the extension rail can be used to extend the SOLI-TEX (Z63) base rail by 40 mm to 240 mm. The clip-on profile ZERO forms an exact plaster edge with drip nose.

The base rail SOLI-TEX-ZERO consists of the base rail SOLI-TEX (S61) and the clip-on profile ZERO (W62-0). The clip-on profile is clipped onto the base rail. The profile’s con- tour forms a drip nose, ensuring that water is accurately guided away. There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The included plug connectors (Z13), butt connectors (Z61) and inner and outer corners (Z18 - 0) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Base rail SOLI-TEX-ZERO, Incl. clip-on profile, with drip edge

W61-0-200550 mm

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)11.9 kg

W61-0-200660 mm

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)13.3 kg

W61-0-200880 mm

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)14.4 kg

W61-0-2010100 mm

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)16.0 kg

W61-0-2012120 mm

Length2.0 m

Packaging unit10 Stäbe = 20 m

Weight (per PU)16.7 kg

W61-0-2014140 mm

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)17.5 kg

W61-0-2016160 mm

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)20.0 kg

Features


Material	Rigid PVC manufactured under DIN 16941
Features	S61-20.. SOLI-TEX base rail 2.0 m W62-0-2100 SOLI-TEX-ZERO clip-on profile 2.1 m
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm Ultrasonic welded
Accessories	Z61-0000 Butt connector (1-2 bars depending on projection) Z13-0000 Plug connectors (1 bag) Z18-0-1010i Internal corners (1 piece) Z18-0-1010a External corners (2 pieces)
Optional accessories	Z63-2004 APU SOLI-TEX extension, rail 40 mm
Inspections	Munich Research Institute for Heat Insulation Heat Transmission Coefficient Test Report

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.