APU-Drip bead DROP-TEX-QUATTRO W40-4

Die APU-Drip bead DROP-TEX-QUATTRO W40-4

The APU drip bead DROP-TEX-QUATTRO is used horizontally in compound heat in- sulation systems for recessed building elements, such as window and door jambs. The diagonal profile contour for float-finish plaster provides a reliable solution in respect of downward guidance of water.

The profile has two punched plaster bars. Welded onto every bar is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. To improve plaster take-up, the surfaces of the plaster edges are grooved.

Design

Drip bead DROP-TEX-QUATTRO, With edge for float-finish plaster and 2 x 12.5 cm mesh

W40-4-2000

Length2.0 m

Packaging unit25 bars = 50 m

Weight (per PU)10.2 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 2 x 12.5 cm wide – MW 6 x 6 mm Ultrasonic welded
Accessories	Z13-0000 Plug connectors (1 bag) Z18-4-1010i Internal corners (2 pieces) Z18-4-1010a External corners (4 pieces)

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.