APU-Stick-on profile DUE W60-2 - APU-Profile am Bau

Die APU-Stick-on profile DUE W60-2

The APU stick-on profile DUE is used horizontally in compound heat insulation systems e.g., for plaster joints up against shutter boxes. The cranked profile contour provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the plaster limb is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The lower limb is fitted with PE foam tape for sticking the profile to the respective surface. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Stick-on profile DUE, With cranked drip edge and 12.5 cm mesh

W60-2-2100

Length2.1 m

Packaging unit10 bars = 21 m

Weight (per PU)3.4 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Features	PE foam tape 14 x 3 mm
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm Ultrasonic welded

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.