APU-Flashing bead PUR-FIX W46 - APU-Profile am Bau

Die APU-Flashing bead PUR-FIX W46

The APU flashing bead PUR-FIX is used at junction points with metal plate in compound heat insulation systems (e.g., at junctions with the roof’s edge) and as a result of its integrated PUR sealing strip produces a flexible connection between plaster and metal. When the plaster work is finished, the profile ensures that water is accurately guided away.

The profile comes with an expanding PUR sealing strip, which ensures a watertight, last- ing seal without any sticking directly to the structural element. Self-adhesive PE tape is applied to fix the profile to the component. The profile has a welded fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The included plug connectors (Z15) enable the profiles to be joined and fitted very precisely and flush. For corner formations, the enclosed corner pieces (Z46) must be used. The corner must also be sealed with a suitable sealant. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Flashing bead PUR-FIX, With 12.5 cm mesh

W46-2000

Length2.0 m

Packaging unit25 bars = 50 m

Weight (per PU)11 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Protective flap	Detachable with soft TPE connection and double-sided self-adhesive tape
Fixation	PE foam tape 6 x 1 mm
Seal	PUR sealing strip, 10 mm, type BG1 Watertight for joints uo to 4 mm
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm Ultrasonic welded
Accessories	Z15-0000 Plug connectors (1 bag)
Corner pieces	Z46-A-1010 Aussenecke (10 Stück) Z46-I-1010 Innenecke (5 Stück)

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.