APU-Drip bead FEBA-TEX-UNI W42 - APU-Profile am Bau

Die APU-Drip bead FEBA-TEX-UNI W42

The APU stop bead with mesh FEBA-TEX-UNI is used in compound heat insulation sys- tems. When a second sealant layer is being created, it forms a clean plaster termination under the window sill.

The profile has 2 plastic wings. As a result of the specified profile contour the required slope of at least 5 degrees is adhered to around the window sill. The top wing, which has no holes, is for applying a suitable sealing film. It is connected together with a soft connection and can thus be flexibly adapted to the appropriate angle of slope. The bottom wing has holes.There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. Using the plug connec- tors (Z14) provided, the profiles can be aligned together flush where they butt up with each other. The soft, transparent drip edge accurately guides water away.

Design

Stop bead with mesh FEBA-TEX-UNI, With soft drip edge and 12.5 cm mesh

W42-2000

Length2.0 m

Packaging unit15 bars = 30 m

Weight (per PU)4.7 kg

Features


Material	Rigid PVC manufactured under DIN 16941 Soft PVC – transparent
Seal	By others
Mesh	Min. 160 g/m2 approved for compound heat insulation systems MW 4x4mm Ultrasonic welded
Accessories	Z14-0000 Plug connectors (1 bag)

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.