APU-Corner bead with mesh MINI W17

Die APU-Corner bead with mesh MINI W17

The APU corner bead with mesh MINI is used in compound heat insulation systems as a flush, impact-protected edge for thin top layers of plaster. If necessary, the bracket can be bent and thus made suitable for curves.

The corner bracket has 2 wings to each of which a strip of mesh is welded. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The ribbed skimming bar makes applying the system of plaster easier and forms a clean corner guard in the area of the corner.

Design

Corner bead with mesh MINI, Grooved with 2 x 12.5 cm mesh

W17-2500

Length2.5 m

Packaging unit25 bars = 62,5 m

Weight (per PU)5.4 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 2 x 12.5 cm wide – MW 4 x 4 mm Ultrasonic welded

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.