APU-Clip-on profile VHF-TOP-TEX V81

Die APU-Clip-on profile VHF-TOP-TEX V81

The APU clip-on profile VHF-TOP-TEX is used for curtain-type, rear-ventilated façades on the upper edge of the support plate in the area of the parapet or under the window sill.

The profile is equipped with a punched plaster web. A fabric strip is welded to the web. Each bar has a one-sided fabric overhang of 10 cm in the longitudinal direction. The rear leg is pre-tensioned for better hold. The soft, transparent drip edge can drain off the water in a targeted manner. After completion of the plastering work, a clean plaster finish is created.

Design

APU clip-on profile VHF-TOP-TEX 12 mm, soft, transparent drip edge and mesh 12.5 cm

V81-2012

Length2.0 m

Packaging unit25 bars = 50 m

Weight (per PU)8.4 kg

Features


Material	Rigid PVC manufactured under DIN-16941 Soft PVC – transparent
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm Ultrasonic welded

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.