Drip bead FEBA-TEX-UNIWith soft drip edge and 12.5 cm mesh

Die APU-Drip bead FEBA-TEX-UNI W42

The APU stop bead with mesh FEBA-TEX-UNI is used in compound heat insulation sys- tems. When a second sealant layer is being created, it forms a clean plaster termination under the window sill.

The profile has 2 plastic wings. As a result of the specified profile contour the required slope of at least 5 degrees is adhered to around the window sill. The top wing, which has no holes, is for applying a suitable sealing film. It is connected together with a soft connection and can thus be flexibly adapted to the appropriate angle of slope. The bottom wing has holes.There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. Using the plug connec- tors (Z14) provided, the profiles can be aligned together flush where they butt up with each other. The soft, transparent drip edge accurately guides water away.


Stop bead with mesh FEBA-TEX-UNI, With soft drip edge and 12.5 cm mesh
Length2.0 m
Packaging unit15 bars = 30 m
Weight (per PU)4.7 kg


  • Rigid PVC manufactured under DIN 16941
  • Soft PVC – transparent
  • By others
  • Min. 160 g/m2 approved for compound heat insulation systems MW 4x4mm
  • Ultrasonic welded
  • Z14-0000 Plug connectors (1 bag)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.


Sectional drawing in mm


Application drawing

Your watchlist is empty