Stick-on profile DUEWith cranked drip edge and 12.5 cm mesh

Die APU-Stick-on profile DUE W60-2

The APU stick-on profile DUE is used horizontally in compound heat insulation systems e.g., for plaster joints up against shutter boxes. The cranked profile contour provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the plaster limb is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The lower limb is fitted with PE foam tape for sticking the profile to the respective surface. What is created after completion of the plastering work is a clean termination of the plaster.


Stick-on profile DUE, With cranked drip edge and 12.5 cm mesh
Length2.1 m
Packaging unit10 bars = 21 m
Weight (per PU)3.4 kg


  • Rigid PVC manufactured under DIN-16941
  • PE foam tape 14 x 3 mm
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.


Sectional drawing in mm



Your watchlist is empty