APU-Window reveal bead with mesh PUR-EX-pro, white W29-pro

Die APU-Window reveal bead with mesh PUR-EX-pro, white W29-pro

The APU window reveal bead with mesh PUR-EX-pro is used in compound heat insulation systems as specified in the latest APU selection criteria. Within the reveal the profile is stuck flush to the structural element there and thus forms a clean and reliable termination of the plaster with shadow gap.

The profile comes with a self-adhesive PE foam tape, which ensures a watertight, lasting seal. The PE foam tape is covered and protected by the profile contour. The integrated expanding PUR sealing strip is able to absorb relatively large movements in the area around the joint. This is activated by removing the protective flap. There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. There is a piece of self-adhesive tape on protective flap in order to secure the third-party protective film. This protects the window during the plastering work. After completion of these tasks, the protective flap is pulled off and what is created is a clean edge to the plaster.

Area of application W29 PUR-EX-pro

With adhesive connection – only for surfaces suitable for being stuck to
Test of adhesion required

Window position

Within masonry

Insulating material thicknessup tp 300mm

Window sizeup tp 10m²

Flush with masonry

see window reveal bead with meshs

In front of masonry

see product documentation W81

Tested according to:

VDPM leaflet: Class A with adhesive connection
Ö-Norm B 6400-2: Class III

Design

Window reveal bead with mesh PUR-EX-pro, With shadow gap and 12.5 cm mesh

W29-24pro

Length2.4 m

Packaging unit25 bars = 60 m

Weight (per PU)11.5 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Protective flap	Detachable with soft TPE connection and double-sided adhesive tape
Features	PUR sealing strip, 10 mm, type BG1 Watertight for joints of 3 - 9 mm
Seal	PE foam tape 14 x 4 mm
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4 x 4 mm Ultrasonic welded
Inspections	VDPM leaflet: Class A with adhesive connection Ö-Norm 6400-2: Class III

Important notes

Storage	Always store profiles laid down in a dry place.
Test of adhesion	Perform adhesion test.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.
Selection criteria	Adhere to the latest APU selection criteria.