W55
Connecting profile ATTIKAWith flexible lug and 12.5 cm mesh

Die APU-Connecting profile ATTIKA W55

The APU connecting profile ATTIKA is used in compound heat insulation systems at junctions with the ends of roof parapets or edges. Using this, it is possible to establish a watertight transition from plaster to metal.

The profile is made up of 2 plastic profiles. The first profile has a punched plaster bar, welded on top of which is a mesh strip. This gets applied to the insulation with reinforce- ment base plaster. The second profile has a length of self-adhesive PE tape so that on the other side the profile can be stuck into the fold-back of the metal. Located between the profiles is the mesh-reinforced connecting lug made of soft PVC, which can absorb movements.
The impact points must be sealed off with suitable adhesive tape. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Connecting profile ATTIKA, With flexible lug and 12.5 cm mesh
W55-2000
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)12.8 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Features
  • PE foam tape 14 x 3 mm
Seal
  • Flexible plastic lug made of soft PVC
  • 120 mm wide
  • White
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
Accessories
  • 4 die-cut parts, templates for forming corners (inside right, inside left, outside right, outside left)
  • Z13-2000 Plug connectors (bag)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Add to watchlist Download product sheet Download processing instructions

Your watchlist is empty