W50
Movement joint DUO-TEXWith 2 x 12.5 cm mesh

Die APU-Movement joint DUO-TEX W50

The APU movement joint DUO-TEX is used in compound heat insulation systems for forming vertical movement joints and in dry wall construction for compensating minor structural element movements.

The profile has two perforated plaster bars, welded to each of which is a mesh strip. Between the profiles there is a co-extruded, flexible TPE loop, which can absorb smaller structural element movements. It is covered with protective film to protect it during the plastering work. Thanks to the flexible lug, the profile can be used on flat surfaces and inner corners. The raised edge of the plaster take-up area is available in two different versions (3 mm and 6 mm plaster thickness). In the course of the work, the profile can additionally be fixed in the insulating material using the plug connectors provided (Z13). The area where pieces abut must be sealed off using a suitable sealant (e.g., PUR sealing strip, Butyl sealing strip, or similar). After the plastering work is completed and protective film is removed, a clean termination of the plaster is created.

Design

Movement joint DUO-TEX, With 2 x 12.5 cm mesh
W50-2003Plaster thickness 3 mm
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)7.1 kg
W50-2006Plaster thickness 6 mm
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)8.1 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
  • TPE manufactured under DIN-16941
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 2 x 12.5 cm wide – MW 4 x 4 mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)
Movement absorbed on surface area
  • W50-2003 stretchable by c. 4 mm, compressible by c. 1-2 mm W50-2006 stretchable by c. 10-15 mm, compressible by c. 1-2 mm
Movement absorbed in internal corner
  • W50-2003 stretchable by c. 2 mm, compressible by c. 1 mm W50-2206 stretchable by c. 5-6 mm, compressible by c. 1-2 mm

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Add to watchlist Download product sheet Download processing instructions Download tender text

Your watchlist is empty