W40-2
Drip bead DROP-TEX-DUEWith cranked drip edge and 2 x 12.5 cm mesh

Die APU-Drip bead DROP-TEX-DUE W40-2

The APU drip bead DROP-TEX-DUE is used horizontally in compound heat insulation systems for recessed building elements, such as window and door jambs. The cranked profile contour provides a reliable solution in respect of downward guidance of water.

The profile has two punched plaster bars. Welded onto every bar is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. To improve plaster take-up, the surfaces of the plaster edges are grooved.

Design

Drip bead DROP-TEX-DUE, With cranked drip edge and 2 x 12.5 cm mesh
W40-2-2000
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)8.0 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems
  • 2 x 12.5 cm wide – MW 4 x 4 mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)
  • Z18-2-1010i Internal corners (2 pieces)
  • Z18-2-1010a External corners (4 pieces)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Add to watchlist Download product sheet Download processing instructions

Your watchlist is empty